Table of Contents
Advertisement
WMScanner GUI and Menus
4 Click Finish.
Editing a Color Scheme
There are many reasons why a color scheme might need to be changed. Use the following steps when
an existing color scheme needs to be edited:
NOTE
The following steps may be used to add or remove basic colors from the Color Scheme.
1 Click once on the color scheme for editing.
2 Click the Edit button. The Color Scheme Editor dialog box appears.
3 Double-click the value to be changed. For this demonstration, select 802.11 Channels.
NOTE
The Color Scheme editor does not always appear the same for all the Scheme Names listed.
4 Change the numeric value.
5 Click on the corresponding color. The basic Color window appears.
6 Select a custom color.
7 Click on the OK button. The Edit Color Scheme window returns.
Scale Floor Plan
The Scale Floor Plan command allows you to scale all entities in the floor plan, providing Summit
WMScanner an accurate representation of distances within the drawing file.
NOTE
It is important to scale a drawing as it allows you to specify the relative dimensions of the building for using during
measurements.
After selecting Scale Floor Plan, left-click in the drawing to select a start point and an end point. When
you are finished, a dialog prompts you to enter the actual physical distance between the two locations.
26
Summit WMScanner Users Guide
Advertisement
Table of Contents
