Deleting Measurement Data - Extreme Networks Summit WMScanner User Manual

Deleting Measurement Data

Use the Measurement Survey > Delete Measurement Data command to remove measurement data from the
current drawing file.
The Measurement Run Delete dialog box appears:
Select the measurement run from the list that you want to remove from the drawing. Next, press OK to
have the measurement data erased from the drawing. If you previously stored an ASCII measurement
logfile (this logfile is written automatically when you collect the data), deleting it from the drawing will
NOT erase the ASCII logfile.
If you wish to also have the ASCII logfile erased, check the Erase Logfile box before deleting the logfile
data from the drawing. Measurement data logfiles, by default, are stored in the Measured sub-directory
of the current project workspace directory.
Summit WMScanner Users Guide
121