Measurement Surveys
The Name Field - Within a drawing file, all reference-tags must have a unique name. That is, the
●
name entered in the name field cannot be used for any other reference-tag within the drawing. If
you accidentally enter a duplicate name in the box, Summit WMScanner displays a warning
message.
Hardware Configuration - The hardware configuration section contains the following fields:
●
The Model Field: This field will always be disabled. Summit WMScanner does not allow user to
■
modify this field.
The Description Field: This field gives a description of the tag. By default the description field
■
displays the type of tag. You can also use this field to give additional information about the tag,
for example, "tag at rear end", "name of the person who placed the tag", etc.
The Reference Code Field:
■
The reference code for active tag is a MAC address. The MAC Address field must be entered in
the correct format.
The reference code for passive tag is a unique identifier. By default the Reference Code Identifier
takes the value same as the reference-tag name. If you enter a duplicate value in the reference
code field Summit WMScanner displays a warning message.
162
Summit WMScanner Users Guide