Scale Drawing; A Completed Site-Specific Model - Viewing Buildings In 2D And 3D; Toggling Between Floor Views - Extreme Networks Summit WMScanner User Manual

Model Building

Scale Drawing

Scaling the drawing normally occurs in the Building Wizard via the Format Floor Wizard or Edit Floor
dialog box, but it may also be performed from the Format Building > Scale Drawing command.
NOTE
If you have CAD drawing files with MANY curves, circles (AutoCAD arcs) Extreme Networks recommends you use the
Scale Drawing command prior to launching the Building Wizard: open the drawing, scale it, save it, and move to the
next floor. When all the building floors are scaled properly, then use the Building Wizard.
If you choose to scale the drawing from the Format Building menu, you have the additional
functionality of choosing whether to scale the entire drawing, the current floor, or individual drawing
entities. Your choice is made in the Scale Drawing dialog.
After you click OK, the software will prompt you to select two points and then you will be prompted to
enter the physical real world distance between those points. Once the points have been selected and a
distance has been entered, the software will automatically scale the corresponding objects (Individual,
Current Floor, Entire Drawing) and refresh the drawing display.
A Completed Site-Specific Model - Viewing Buildings in
2D and 3D
This section presents examples of final building models processed through Summit WMScanner's
Format Building functions. In the examples that follow, match the partition colors in the building
diagram to the Partition Categories in the Legend Data window to determine the material type.

Toggling Between Floor Views

By default, the Summit WMScanner displays the first floor of the building model in 2D.
Summit WMScanner Users Guide
208