Table of Contents
Advertisement
Model Building
Attach/Detach Raster Image - This command opens the Image dialog. A user can then insert a raster or
bit-mapped black and white, 8-bit gray, 8-bit color or 24-bit color image file into the drawing. Users
can insert images in a variety of formats, including Bitmap (.bmp), Tagged-Image File Format (.tif),
Joint Photographic Experts Group files (.jpg) and Portable Network Graphics (*.png). More than one
image can be displayed in any viewport, and the number and size of images is not limited. Once
you no longer need the raster image, you can detach the image from the drawing using this
command under the Format Building > Insert menu. This command is useful when a user would
like to trace out partitions over a scanned image. In this case, you attach the scanned image, and
then use the Format Building > Draw Partition command to trace out formatted partitions. Finally,
you may detach the scanned image when it is no longer necessary for formatting. This helps keep
the file size to a minimum and simplifies the appearance of the drawing.
Summit WMScanner Users Guide
184
Advertisement
Table of Contents
