Extreme Networks Summit WMScanner User Manual page 175

b Press Sketch Floor to display the Draw Partition dialog box.
The Draw Partition dialog box enables you to add new partitions to the drawing. This is used
most frequently when tracing over an imported raster image of a blueprint, but may also be used
to sketch a floor plan from scratch. If you are using this manual as a step-by-step follow along
guide, see "Drawing Partitions" on page 196
partitions, then return to this section to continue with sketching a floor plan using the Floor
Formatting Wizard.
4 Scale Floor.
This step requires you scale the floor you sketched in step three. It is important for Summit
WMScanner to know the relational distance of one wall to another. Press the Scale Floor button on
the wizard dialog box.
Summit WMScanner Users Guide
now for additional information on drawing
173