Editing Floors In An Existing Building Model - Extreme Networks Summit WMScanner User Manual

Choosing to import a preformatted floor will display an additional option where you must select the
location of the formatted file you wish to import. Use the Browse button to locate your unformatted file
on disk, then press Next to proceed to step two.
If the file you choose to import has more than one floor, you will be prompted to select which floor
number you would like to import from the already formatted file.
Importing from an already formatted file gives you the ability to use a team of multiple people to
format the floors of a building, then quickly assemble the multiple floors into one single drawing.

Editing Floors in an Existing Building Model

Editing a floor in the Building Floor Manager allows you to make modifications to a floor that you have
already formatted with the Format Floor Wizard. The Edit Floor option will only be available for floors
that have already been formatted. To begin editing a floor, choose an already formatted floor from the
list of floors on the Building Floor Manager's main dialog and then press the Edit Floor button.
Select the Edit Floor button to modify an already formatted floor using the Floor Formatting Wizard.
Selecting an empty floor causes the Format Floor button to display. See
Floor Formatting Wizard" on page 169
The following options are available from the Building Floor Manager dialog:
Rescale Floor
●
Reset Floor Alignment Point
●
Draw New Partitions
●
Convert Partition Type
●
Process Unformatted Layers
●
Clear Floor
●
Edit Floor Name
●
Summit WMScanner Users Guide
for further details.
"Formatting Floors Using the
181