Measurement Surveys
The Edit/Remove WLAN Controller dialog box shows a list of every controller in the drawing. The
following options are available from the Edit/Remove WLAN Controller dialog box:
Edit - The Edit button allows you to configure a controller. See
●
Move - The Move button allows you to move a controller from a previous location to a new point in
●
the drawing where you click.
Remove - The Remove button permanently removes the controller from the drawing.
●
Copy - To copy a controller, select it from the list and press the Copy button. You may then click on
●
the drawing to place a copy of the controller the same way you use the Place Controller command.
Press the ESC key to return to the Edit/Remove WLAN Controller dialog box.
Edit Controller
Choosing the Edit button on the Edit/Remove WLAN Controller dialog box opens the Edit WLAN
Controller window.
146
"Edit Controller" on page
Summit WMScanner Users Guide
146.