Extreme Networks Summit WMScanner User Manual page 199

View/Edit Partitions - Use the View/Edit Partitions button to examine or change partition attenuation
●
factors.
Draw Partition - This button allows you to add partitions. To do this, select the desired partition type
●
from the pull-down list in the dialog box and then click the Draw Partition button. The pull-down list
displays the eight partition types you choose within Format Building > Current Partition Categories (see
"Current Partition Categories" on page
Summit WMScanner allows you to place partitions by clicking in the drawing with the mouse
cursor. Left click to start drawing a partition, and left click in another location to complete the
partition. If you continue to left click in successive locations, a continuous series of walls will be
drawn. Right click (or press the ESC key) to begin an unconnected string of partitions elsewhere in
the building. Right click twice (or press ESC twice) to return to the Draw Partition dialog box.
Draw Room - Allows you to draw rectilinear rooms with square corners. To do this, select the Draw
●
Room button, then click in the drawing to indicate one corner of the room, then click again to
indicate the opposite corner.
Delete Partitions - This button provides a way to undo partitions you have drawn. Each time you
●
click Delete Partitions, a previously drawn partition is deleted, starting with the most recently drawn
partitions.
Snap To Endpoints - This checkbox helps you to draw partitions that join properly with no gaps
●
between walls. When the Snap To Endpoints checkbox is selected, and you are drawing partitions, a
Summit WMScanner Users Guide
200).
197