Editing Reference Tag - Extreme Networks Summit WMScanner User Manual

Edit – the edit option allows you to edit an individual reference tag's name, description, reference
●
code, floor, height of floor, x-coordinate, y- coordinate, and marker size. You can also double-click
the reference-tag to bring up the Edit Reference-Tag dialog box. See more options on
Reference Tag" on page
Move - the move option allows you to move a reference-tag to a new location on the drawing. To
●
move a reference-tag, select it from the list and then click the Move button. Click on a new location
on the drawing to move the reference-tag to a new location.
Copy - the copy option allows you to copy the reference-tag to a new location. To copy a reference
●
tag, select it from the list and click the Copy button. You may then click on the drawing to place a
copy of the reference-tag, in the same way you use the Place Reference-Tag command. Press the ESC
key to return to the Edit/Remove Reference-Tag dialog box. You can copy a reference-tag to another
floor in the drawing by first changing to that floor.
Remove - the remove option permanently removes the reference-tag from the drawing. To remove a
●
reference-tag, select it from the list and then click the Remove button. To remove multiple access
points press the CTRL key and select multiple reference-tags and then click the Remove button.

Editing Reference Tag

Choosing the Edit button from the Edit/Remove Reference-Tag dialog box opens dialog box that allows
you to configure your tag.
Summit WMScanner allows different edit options for active and passive tags.
Summit WMScanner Users Guide
161.
"Editing
161