Extreme Networks Summit WMScanner User Manual page 53

To select a project workspace to be the current workspace, you may first select a repository of
workspaces, using the Browse button. The current workspace repository is indicated to the left of the
Browse button. The default repository directory is "C:\Program Files\Summit
WMScanner\Workspaces". You will only need to select a different repository if your workspaces are
stored on a file server or other non-default location, e.g. if you are sharing centrally stored workspaces
with collaborators. Note that the project workspace repository is reset when the dialog box is closed, to
the repository in which the current workspace is stored.
Below the project workspace repository is a list of available project workspaces selected. Selecting a
project workspace specifies that you want to work with all files, configurations, and custom settings
belonging to that particular workspace. By default, Summit WMScanner picks the last active project
workspace to be current on startup. Select the desired workspace, then click Set Current to change the
workspace. When you are finished with the Project Workspace selection dialog, click Done to exit.
Summit WMScanner Users Guide
51