Interrupt Clear Timer - Kyocera TASKalfa 300i Operation Manual

Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds).
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1
Press the System Menu key.
2
Press [ ], [Date/Timer], [
3
Press [+] or [–] to enter the time until printing restarts.
You cannot use the numeric keys to enter this value.
4
Press [OK].

Interrupt Clear Timer

Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1
Press the System Menu key.
2
Press [ ], [Date/Timer], [
3
Press [+] or [-] to enter the time for the interrupt clear timer.
4
Press [OK].
] and then [Change] of Error Clear Timer.
] and then [Change] of Interrupt Clear Timer.
8-50
Default Setting (System Menu)