Notes On Operation; Power Off (Epl-6200); Caution About Hot Parts (Epl-6200/Epl-6200L); About The Moist Environment Mode Select - Epson EPL-6200 Service Manual

EPSON EPL-6200/EPL-6200L

1.10 Notes on Operation

1.10.1 Power Off (EPL-6200)

EPL-6200 incorporates an internal non-volatile memory (EEPROM).
If the power to the printer is turned off during the process of writing in non-volatile
memory, the successful writing in the non-volatile memory cannot be guaranteed.
Therefore, the next time the printer is turned on, panel settings may be initialized or a
service call error may occur.
The non-volatile memory saves the function settings, and the following cases are those
in which the memory is rewritten, and therefore the printer should not be powered off:
After the printer is powered on, until the Ready LED lights up.
While the printer is printing.
(While the paper feed motor is operating.)
While the Data LED is flashing or lit.
To stop the printer, either put it off line or carry out All Print Job Data Cancel.

1.10.2 Caution About Hot Parts (EPL-6200/EPL-6200L)

The fuser unit inside the printer is heated to high temperatures, once the printer cover is
opened to clear paper jam or for some reasons, take care not to touch the fuser unit.
Product Description

1.10.3 About the Moist Environment Mode Select

This is a switch that operates to lower the print density in a high humidity environment.
Ordinarily it does not operate.
Use this switch only in cases where the above special environmental conditions exist.
When the use environment returns to normal environmental conditions, it is necessary
to return it to the original setting immediately.
SETTING PROCEDURE
1. Open the printer driver on the personal computer.
2. Open the "Optional Settings" page.
3. Click the "Extended Settings" button while holding down [ALT] + [CTRL] + [Z] keys.
NOTE: For details, see
This function, a hidden function, must not be opened to users.
This setting can be made by a serviceman in specific cases
where no other measure hardly can cope with the problem
since the user environment is highly humid.
Print quality is not guaranteed if the printer is used with the high-
humidity environment setting in normal environment.
Notes on Operation
"1.6.4 Special Operation (EPL-6200L)
Revision A
(p.54)".
60