EPSON Stylus Pro 7000
1.9 Ink Cartridge Select Mode
The printer cannot detect the size of the ink cartridge; therefore the user must
manually select the size with this mode. To enter this mode:
Power-on button:
SelecType
For details on how to make settings, see "SelecType Settings" on page 41. To
exit a mode, turn the printer off and on again.
Table 1-45. Ink Cartridge Select Mode
LCD Message
CARTRIDGE SIZE
Product Description
Item
100ml, 200ml
Ink Cartridge Select Mode
1.10 Firmware Update
C H E C K
The information contained in this section is not to be shared
P O I N T
publicly.
The firmware contained on the Main Board is Flash ROM; therefore if you
need to update the firmware or replace the Main Board, see "Parameter
Backup" on page 157 and "Firmware Update" on page 160 for details.
Revision A
52