Table of Contents
Advertisement
Administrator's Guide
"Logging on to the Printer Using Web Config" on page 35
&
Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network. The time server may be operated within the organization or published on the Internet.
When using the CA certificate, time-related trouble can be prevented by synchronizing with the time server.
1. Access Web Config and select the Device Management tab > Date and Time > Time Server.
2. Select Use for Use Time Server.
3. Enter the time server address for Time Server Address.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4. Enter Update Interval (min).
You can set up to 10,080 minutes by the minute.
5. Click OK.
Note:
You can confirm the connection status with the time server on Time Server Status.
Related Information
"Accessing Web Config" on page 23
&
"Logging on to the Printer Using Web Config" on page 35
&
Function Settings
30
Advertisement
Table of Contents
