4
Slide the cartridge straight into the slot, label side up,
until it clicks into place. It will not go in all the way.
5
Slide the lever all the way
right, to the Lock position.
6
Close the cartridge door.
PictureMate charges the
print head for 3 to 4
minutes.
7
When you see the Charging complete message on
the screen, press OK on the remote control.
4
Set the Date
and Time
1
Adjust the screen.
2
When you see this screen, use the arrows on the
remote control to enter the date, then press OK.
3
Use the arrows on the remote control to select the
time format and enter the time. Then press OK.
4
Press OK on the next 2 screens.