Databar Omnidirectional 2D Component Enable - Datalogic Magellan 8500 Product Reference Manual

DataBar Omnidirectional 2D Component Enable

Product Reference Guide
When this feature is enabled, the software will not decode an DataBar
Omnidirectional barcode with a 2D component associated with it, and
the 2D component will be discarded.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You'll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
DATABAR OMNIDIRECTIONAL 2D COMPONENT = DISABLE
DATABAR OMNIDIRECTIONAL 2D COMPONENT = ENABLE
6-175