German Gs Safety Certification; Installation - Datalogic MAGELLAN 1500i Quick Reference Manual

Omnidirectional imaging scanner

Hide thumbs Also See for MAGELLAN 1500i:

Table of Contents

German GS Safety Certification

The following statement is required for the German GS safety

certification

This product is not intended for use in the immediate or direct visual

field of the display work place. To avoid disturbing reflections on

the display work place, this product shall not be placed in the

immediate or direct field of vision.

Route the interface cable from the terminal or host. Plug the AC adapter

(if one is used) into a wall outlet and the interface (I/F) cable, then route

and attach the I/F cable to the scanner. Verify operation by presenting

known-good bar codes to the scanner. The unit should beep

flash its good read LED and send the bar code data to the host or

terminal. If not, refer to the Troubleshooting section of this guide.

Connect

Here

The Magellan 1500i uses intelligent illumination technology to optimize

light levels for a variety of bar code scanner functions including

automatic reading of bar codes from printed surfaces, mobile devices

and image capture in variable contrast enviro+nments.

1. Beeper and LED behavior is selectable and may have been disabled by a pre-

vious user.

I/F Cable

To Host/Terminal

A/C Adapter

(if needed)

QUICK REFERENCE GUIDE

and/or

Table of Contents