First Character Transmission - Datalogic Magellan 8500Xt Product Reference Manual

EAN-13 First Character Transmission
This item is ignored when the advanced feature, Full Label Edit, is enabled.
NOTE
7-154
Enables/disables transmission of EAN/JAN-13 first character.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
EAN-13 FIRST CHARACTER TRANSMISSION = DISABLE
EAN-13 FIRST CHARACTER TRANSMISSION = ENABLE
TM
Magellan 8500Xt Scanner