Green Spot Duration; Green Spot Led Intensity - Datalogic Gryphon I GFE4500 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Green Spot Duration

Specifies the duration of the good read pointer beam after a good read.
$CLSSP00

Green Spot Duration = Short (300 msec)
$CLSSP02
Green Spot Duration = Long (800 msec)

Green Spot LED Intensity

With the following settings the intensity of Green Spot LED can modified if needed.
$CLAGI00\r
Set Green Spot Intensity Level = Mid
$CLAGI02\r
86
GRYPHON™ GFS4500
Green Spot Duration = Disable (Green Spot is Off)
$CLSSP01
Green Spot Duration = Medium (500 msec)
$CLSSP03
Set Green Spot Intensity Level = Low
$CLAGI01\r

Set Green Spot Intensity Level = High
READING PARAMETERS