Show Setup Express - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

show setup express

Use the show setup express privileged EXEC command to display if Express Setup mode is active on
the switch.
Syntax Description
| begin
| exclude
| include
expression
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Examples This is an example of output from the show setup express command:
Switch# show setup express
express setup mode is active
Related Commands Command
setup express
OL-8604-03
show setup express [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Enables Express Setup mode.
Catalyst 2960 Switch Command Reference
show setup express
2-549