Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 377

System Speed Dial Numbers
4. At this point:
5. Press
Using
System Phone
You can lift the handset or press
1. If you want to call on a specific line, press the line button (or press
8
and the two-digit line number). If you want to call on a line in a specific
pool at a pooled extension, press the pool button (or press
the three digit pool access code 880, 881,882, or 883).
2. Press
3. Dial the three-digit System Speed Dial code (600–699).
If you did not specify an outside line or pool, the system automatically
selects one, turns on the speaker if the handset is in the cradle, and dials
the number. The number being dialed shows on a display phone unless it is
a Marked System Speed Dial Number.
Standard Phone
1. Lift the handset.
You hear intercom dial tone.
2. Press
3. Dial the three-digit System Speed Dial code (600–699).
The system automatically selects an outside line and dials the number.
To program another System Speed Dial number, start from Step 2.
To program over an existing number, enter the new number after
selecting the three-digit code.
To remove a System Speed Dial number, enter the number's
three-digit code and press
f 0 0
to exit programming mode.
S
f
.
#
.
!
once.
before dialing:
i
i
and dial
5-267