Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 213

Direct Extension Dial Delay (#112)—Release 2.0 or
Later
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the number of times an incoming call rings at extension 10 before the
system answers it:
1. Press
2. To change the number of rings, press
displays.
3. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 1 1 2
.
D
until the appropriate value
5-103