Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 226

Feature Reference
Specific Star Codes. To prevent the use of a specific star code (for
example, *67 to block Caller ID information), enter the * plus the 2- or
3-digit code (for touch-tone phones) and 11 (equivalent to a * on rotary
phones) plus the 2- or 3-digit code.
— For touch-tone phones
— For rotary phones
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To create a list of Disallowed Phone Numbers:
1. Press
10 or 11.
2. At the List Number: prompt, enter a list number (1–8). For example, to
select the first list, press
3. At the Entry: prompt, select a list entry (01–10).
4. At the Data- - - - - - - - - - - - prompt, enter the first telephone
number.
5. To save the telephone number in memory, you must press
6. At this point:
7. Select another procedure using
programming mode.
5-116
*67 Prevents use of *67 to block Caller ID information
1167 Prevents use of 1167 to block Caller ID information
e
and on system phones.)
f 0 0 s s # 4 0 4
1
.
To add other phone numbers to this list, press
different list entry and repeat Steps 4 and 5.
To change the phone number you just entered, press
repeat Steps 4 and 5.
To delete the phone number you just entered, press
To create another list, press
from Step 2.
n
N P
or
N P
or
at extension
e
.
to select a
r
and
r
.
and repeat
or exit