Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 329

Pool Extension Assignment (#314)—Release 2.0 or
Later
4. At this point:
Then press a button with lights to assign the auxiliary pool to that button. If
you use option 3 after an auxiliary pool has been assigned, the auxiliary
pool moves from the old button to the new button you select.
5. At this point:
6. Select another procedure or exit programming mode.
If you want to assign the pool to the first available button with lights,
D
press until a display similar to the following appears:
Pool Ext Assign 15 P881
1 Assigned
If you want to remove a pool assignment, press
display similar to the following appears:
Pool Ext Assign 15 P881
2 Not Assigned
For auxiliary pools only, if you want to assign the pool to a specific
button, press 3. A display similar to the following appears:
Pool Ext Assign 15 P881
3 Select a Button
To assign another pool for this extension, press
until the pool access code shows on the display. Then repeat Step
4.
To program another extension, press
begin at Step 2.
D
until a
n p
or
N P
and
5-219