Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 185

Caller ID Call Logging and Dialing (F23)—Release 2.0
or Later
To view the log:
1. Press your preprogrammed Call Log button.
The green light flutters and the Call Log is activated. One of several
messages is displayed.
2. Press the More button repeatedly until you see the Telephone Number
Display (shown in Figure 5-2).
* 9 0 8
N e x t
Figure 5-2. Caller ID Telephone Number Display
At the Telephone Number Display shown in Figure 2, the newest call in the log is
shown. The log shows the calls in last-in-first-out order.
An Out-of-Area message displays if the call was dialed from a region that does
not support Caller ID. A Privacy message displays if the caller blocked
transmission of Caller ID information. A No Number message displays if no
information was received.
You have several options at the Telephone Number Display:
Press the Next button to view the next logged call.
If you have a second call logged, it is displayed.
Press the Prev. button to view the Telephone Number Display of the
previous log record.
Press the Dial button to dial the telephone number and return the call
(see dialing instructions that follow).
Press the More button to view the caller's name.
At the Name Display, shown in Figure 5-3, the caller's name is shown. If the
caller's name is not available, one of the following messages displays:
An Out-of-Area message displays if the call was dialed from a region
that does not support Caller ID.
A Privacy message displays if the caller blocked transmission of Caller ID
information.
- 5 5 5 -
P r e v .
1 2 3 4
D i a l M o r e
5-75