Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 66

Programming
To program at the extension, use the following procedure:
1. To start programming, dial
The green lights next to buttons on which lines or pools are assigned for
the extension show the current Line Ringing settings. Remaining buttons
can be programmed with telephone numbers, extension numbers, or
system features.
2. To assign a name to the extension, press left
character codes. See ''Extension Name Display'' for the codes.
3. Program Personal Speed Dial Numbers, Auto Dial numbers, or system
features as described in Chapter 5.
To erase the current programming from a button, press the button, then
!
press
4. To exit programming mode, you can press
off-hook, then place it back in the cradle.
2-34
f 0 0
.
.
i
, then enter the
f 0 0
, or lift the handset