Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 361

Special Dialing Functions
Recall/Centrex Feature Button: The following entry shows how to
program an Auto Dial button with a Centrex feature that you use while on a
call, for which the feature access code is *32. This example includes a
Recall signal to send a switchhook flash to the Centrex system when you
S
are already on a call. (You can store a Recall signal by pressing , but
only if it is the first character stored.) It also includes a 1.5-second pause
h
(which you insert by pressing ) to allow time to get a new Centrex dial
S h * 3 2
tone: .
Stop: Your local bank-by-phone service requires that you enter a password
before the account number. To program a Personal Speed Dial number or
an Auto Dial button to call the bank at 555-7898, include a stop for
manually entering the password, and continue with the account number
5 5 5 7 8 9 8! 6 7 9 8 8
(679 88), enter .
Touch-Tone Enable: Your system is connected to rotary lines but you
want to call an answering machine at 555-3454 to retrieve messages.
5 5 5 3 4 5 4
Since the machine requires touch tones, enter
&
. All digits pressed during the rest of the call are sent as touch tones.
On/Off Centrex Feature Button: To include both the activation and
!
deactivation codes for a Centrex feature on the same button, press
to include a stop between the two codes. For instance, if the code to
activate a Centrex feature is *30 and the code to deactivate the feature is
* 3 0! * 3 1
*31, store on the Auto Dial button.
The first time you press the Auto Dial button, only the number before the
stop is dialed (to activate the feature). When you press the button again,
the rest of the stored number is dialed (to deactivate the feature).
Number Outside a PBX or Centrex System: To store a number that dials
out of a PBX or Centrex system, include a dial-out code in the Speed Dial
number. This entry, to dial the number 201 555-4321, includes a dial-out
code, a 1.5-second pause, and a toll call prefix of 1 for direct dialing (which
9 h 1 2 0 1 5 5 5
may not be required for your dialing area):
4 3 2 1
.
5-251