Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 148

Feature Reference
Considerations
Standard phones and system phones without a programmed VMS Cover button
cannot override this feature once it is assigned to an extension.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the Automatic VMS Cover setting for an extension:
1. Press
10 or 11.
2. Enter the number of the extension to be covered by the voice messaging
system. For example, to program extension 11, press
3. To assign or unassign Automatic VMS Cover, press
appropriate value displays.
4. To program another extension, press
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-38
e
and on system phones.)
f0 0 s s # 3 1 0
1 1
.
D
n p
or until the
at extension
until the