Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 288

Feature Reference
Valid Entries
System line number
System extension number
No lines owned by an extension
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the Line Coverage setting for an extension:
1. Press
10 or 11.
2. Enter the desired line number. For example, to program line 12,
press
3. Enter the number of the extension to be assigned ownership of the line.
4. At this point:
5. Select another procedure or exit programming mode.
5-178
e
and on system phones.)
f 0 0 s s # 2 0 8
1 2
.
To delete the current setting, press
To program another line, press
number shows on the display. Then repeat Step 3.
r
.
n p
or until the line
at extension