Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 311

Night Service Group Extensions (#504)
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 13, press
3. To assign or unassign the extension, press
value displays.
4. To assign or unassign another extension, press
the extension number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 5 0 4
1 3
.
D
until the appropriate
n
or
at extension
p
until
5-201