Vms Cover Rings (#321)- Release 3.0 Or Later - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

VMS Cover Rings (#321)— Release 3.0 or Later
VMS Cover Rings (#321)—
Release 3.0 or Later
Description
This feature applies only if you have a voice messaging system.
This System Programming procedure, which applies to all system extensions
programmed for VMS Cover, defines the number of times a call rings before it is
sent to a user's voice mailbox. For ACS Release 3.0, VMS Cover Rings is
programmable on a per extension basis.
Related Features
VMS Cover Rings also applies to extensions that have been designated an
owner with Line Coverage Extension (#208).
If an extension has VMS Cover (F15) or Automatic VMS Cover Rings
(#310) active, unanswered calls to that extension are routed to the voice
messaging system after the specified number of VMS Cover Rings.
Valid Entries
1–9
3
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the number of times calls ring before being sent to the voice
messaging system:
1. Press
10 or 11.
2. At the extension prompt, enter an extension number.
3. The Cover Rings prompt displays:
VMS Cover Rings XX
3 Rings
Enter a setting (1–9) or press
4. To set VMS Cover Rings for another extension, press
until the extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 3 2 1
D
at extension
until the correct value appears:
n p
or
5-283