Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 335

Recall (F03)
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To program a Recall button:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press
5. Program another button for this extension or exit programming mode.
Using
To access a PBX, central office, or Centrex feature (such as Call Waiting) while
active on an outside line:
System Phone
1. Press the programmed button or press
2. Enter the access code for the feature (if required).
3. To return to your original call, press the programmed button or
press
Standard Phone
1. Press the switchhook (or press the Recall or Flash button on a feature
phone that has one).
You hear intercom dial tone.
2. Press
3. Enter the access code for the feature (if required).
4. To return to your original call, press the switchhook (or press the Recall or
Flash button on a feature phone) again.
e
and on system phones.)
f 0 0 s s c
f 0 3
.
f 0 3
again.
# 0 3
.
at extension
f 0 3
.
5-225