Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 482

Extensions
LINE ASSIGNMENT
(p. 5-173)
DIAL #301
DIAL a system extension number
To remove all existing line
assignments, press
Remove
before selecting a line.
DIAL a line number.
DIAL 1 = Assigned
2 = Not Assigned
3 = Select Button then press
a programmable button (to
assign the line to that button).
If you use option 3 after a Iine
has been assigned, the line
moves from the old button to
the new button you select.
PRESS to program another
Next Item
line for this extension.
To program another extension:
PRESS
Next Procedure Prev Procedure
enter a new extension number
and repeat above steps.
LINE ACCESS RESTRICTION
(p. 5-171)
DIAL #302
DIAL
a system extension number
DIAL
a system line number
DIAL
1 = No Restriction
2 = Outgoing Only
3 = Incoming Only
4 = No Access (line appears
on button, but you can
use line only to pick up a
transferred or held call)
To program another extension:
PRESS
Next Procedure Prev Procedure
enter a new extension number
and repeat above steps.
DISPLAY LANGUAGE
(p. 5-119)
DIAL #303
DIAL a system extension number
1 = English
DIAL
2 = Spanish
3 = French
PRESS Next Item to program another
extension
AUTOMATIC EXTENSION PRIVACY
(p. 5-21)
DIAL #304
DIAL a system extension number
1 = Assigned
DIAL
2 = Not Assigned
PRESS to program another
Next Item
extension
Procedures #207, #313, #314 and #315—shown in square dotted boxes—
— — — — — — — — — — — — — — — — — — — — — — — — —
SYSTEM RESET – PROGRAMMING SAVED
IMPORTANT: Using this procedure disconnects any active cqalls but retains system
settings. Use it only if the system fails to function correctly after a power failure or down period.
DIAL #728
— — — — — — — — — — — — — — — — — — — — — — — — —
ABBREVIATED RINGING
(p. 5-6)
DIAL #305
DIAL a system extension number
DIAL 1 = Active (1 ring)
2 = Not Active (repeated
ringing)
PRESS to program another
Next Item
extension
TRANSFER RETURN EXTENSION
(p. 5-271)
DIAL #308
DIAL a system extension number
DIAL number of the extension
(10-57) to which call should
return if not answered
Extension transferring call
PRESS to program another
Next Item
extension
FORCED ACCOUNT CODE ENTRY
(p. 5-138)
DIAL #307
DIAL a system extension number
DIAL 1 = Assigned
2 = Not Assigned
PRESS to program another
Next Item
extension
DISTINCTIVE RING
(p. 5-120)
DIAL #308
DIAL a system extension number
1 = Active
DIAL
2 = Not Active
PRESS to program another
Next Item
extension
INTERCOM DIAL TONE
(p. 5-164)
DIAL #309
DIAL a system extension number
DIAL
1 = Regular
2 = Machine
PRESS Next Item to program another
extension
AUTOMATIC VMS COVER
(p. 5-37)
DIAL #310
DIAL a system extension number
1 = Assigned
DIAL
2 = Not Assigned
PRESS to program another
Next Item
extension
EXTERNAL HOTLINE
DIAL #311
DIAL a system extension number
DIAL 1 = Assigned
2 = Not Assigned
PRESS to program another
Next Item
extension
VOICE INTERRUPT ON BUSY
DIAL #312
DIAL a system extension number
DIAL
1 = Assigned
2 = Not Assigned
PRESS to program another
Next Item
extension
LINE ACCESS MODE
DIAL #313
DIAL a system extension number
DIAL 1 = Pooled all extensions
except 10
2 = Key extension 10
only
POOL EXTENSION ASSIGNMENT
DIAL #314
DIAL a system extension number
To remove all existing pool
assignments, press
before selecting a line.
DIAL a pool access code (880,
881, 882, or 883)
DIAL 1 = Assigned
2 = Not Assigned
882, 883
3 = Select Button then
press a programmable;
button (auxiliary pools
only)
PRESS
Next Item
another pool for this extension.
To program another extension:
PRESS
Next Procedure Prev Procedure
enter a new extension number
and repeat above steps.
POOL ACCESS RESTRICTION
DIAL #315
DIAL a system extension number
DIAL a pool number (880, 881,
882, or 883)
DIAL 1 = No Restriction
2 = Outgoing Only
3 = Incoming Only
4 = No Access
PRESS to program
Next Item
another pool
To program another extension:
PRESS
Next Procedure Prev Procedure
enter a new extension number
and repeat above steps.
[ ]
2.0
(p. 5-132) CALL WAITING
DIAL #316
DIAL a system extension number
DIAL 1 = Assigned
2 = Not Assigned
PRESS
Next Item
extension
CALLER ID LOG ANSWERED CALLS
(p. 5-288)
DIAL #317
a system extension number
DIAL
DIAL 1 = Active
2 = Not Active
PRESS
Next Item
extension
(p. 5-169)
CALLER ID CALL LOG LINE
[ ]
2.0
ASSOCIATION
#318
D I A L
DIAL a system extension number
a system line number
D I A L
PRESS
Next Item
line with this extension
To associate another extension:
PRESS
Next Procedure
(p. 5-217)
enter a new extension number
[ ]
and repeat above steps.
2.0
CALLER ID LOG ALL CALLS
Remove
DIAL #319
DIAL a system extension number
880
CALL COVERAGE RINGS
881,
DIAL #320
DIAL one digit (1–9) for the number
of rings before the call is sent
to the covering extension
2 rings
to program
For Centralized Telephone
Programming, see previous
pages.
VMS COVER RINGS [
[ ]
2.0
(p. 5-215) DIAL #321
DIAL one digit (1–9) for the number
of rings before the call is sent
to the voice messaging system
3 rings
— — — — — — — — —
COPY SETTINGS
DIAL #399
DIAL a source extension number
DIAL target extension numbers
— — — — — — — — —
= Factory setting
= Button with lights required
[ ]
2.0 = PARTNER ACS Revision 2.0 or later
[ ]
3.0 = PARTNER ACS Revision 3.0 or later
(p. 5-263)
(p. 5-61)
to program another
(p. 5-68)
[ ]
2.0
to program another
[ ]
2.0
(p. 5-70)
to associate another
Prev Procedure
[ ]
2.0
(p. 5-79)
[ ]
3.0
(p. 5-51)
]
3.0
(p. 5-289)
(p. 5-96)