Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 237

Emergency Phone Number List (#406)
Overriding Number on a Disallowed List. You can use Emergency List
entries to override numbers that would otherwise be disallowed. For
example, if you created Disallowed List entries to prevent calls to area code
201, but you want to allow calls to a specific number in that area code
(such as the number of a manager who is on call after hours), put the
number in the Emergency List:
— Toll Call Prefix required
— Toll Call Prefix not required
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To create an Emergency Phone Number List:
1. Press
10 or 11.
2. Select a list entry (01–10). For example, to select the third entry, press
3
. A display similar to the following appears:
Emergency List 03
Data - - - - - - - - - - - -
3. Enter the telephone number.
4. To save the telephone number in memory, you must press
5. At this point:
6. Select another procedure or exit programming mode.
12015556666 and 02015556666
2015556666
e
and on system phones.)
f 0 0 s s # 4 0 6
To enter other phone numbers, press
list entry and repeat Steps 3 and 4.
To change the phone number you just entered, press
repeat Steps 3 and 4.
To delete the phone number you just entered, press
at extension
e
.
n
to select a different
r
r
.
5-127
0
and