Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 113

Overview
Table 5-2.
1
Dial-Code Feature
F01 Do Not Disturb
F02 Exclusive Hold
F03 Recall
F04 Save Number Redial
F05 Last Number Redial
F06 Conference Drop
2
F07 Privacy
F08 Touch-Tone Enable
F09 XX Message Light On
F10 XX Message Light Off
F11, XX , XX Call Forwarding/Call Follow-Me
F12 Account Code Entry
F13 XX Manual Signaling (beep or ring)
F13* XX
Manual Signaling (voice signal)
F14 Voice Mailbox Transfer
Table 5-2a.
Intercom Dial-Code Features
I6 XX Call Pickup
I66 G Group Pickup
I68 LL Direct Line Pickup—Active Line
Loudspeaker Paging
I70
I*70 Simultaneous Paging
I7 G Group Calling—Ring
I*7G Group Calling—Page
I77 G Group Hunting—Ring
Group Hunting—Voice Signal
I*77G
I8 LL Direct Line Pickup—Idle Line
Automatic System Answer Record/Playback
I891
I892 Direct Extension Dial Record/Playback
1. A 5-Slot carrier can provide a maximum of 40 extensions or a maximum of 19 lines; a 2-Slot carrier can provide
a maximum of 16 extensions or a maximum of 7 lines. References in this guide are to 40 extensions and to 19
lines, even though no system can be configured with both maximums simultaneously. Your system does not
have to be configured for the maximum of either extensions or lines.
F represents the f button I represents the i button; XX represents a system extension number; G
represents a single-digit group number; and LL represents a system line number.
2. Available only on system phones
3. PARTNER ACS Release 2.0 or later
4. PARTNER ACS Release 3.0 or later
2
2
2
2
2
1
2
F15 VMS Cover
F16 Caller ID Name Display
F17 Caller ID Inspect
F18 Voice Interrupt On Busy Talk-Back
F19 Background Music
F20, XX,XX
Call Coverage
F21 Station Lock
F22 Station Unlock
F23 Caller ID Call Logging and Dialing
F24 Record-a-Call
F25 Call Screening
F41 Contact Closure 1
F42 Contact Closure 2
F59 System Release Status
3
3
2
2
2
2
3
2
2
2, 4
2, 4
2
5-3