Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 141

Automatic System Answer Lines (#204)—Release 2.0 or
Later
Only outside calls on Automatic System Answer lines are answered
automatically. Intercom, transferred, and transfer-return calls are not
answered automatically.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To identify the lines on which outside calls should be answered by the system:
1. Press
2. Enter the two-digit system line number of the desired line. For example, to
specify line 1, press
3. To assign or unassign the line, press
displays.
4. To identify another line, press
shows on the display. Then repeat Step 3.
5. Repeat Steps 3 and 4 for all the lines that you want to identify.
6. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 2 0 4
0 1
.
D
until the appropriate value
n p
or until the line number
.
5-31