Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 382

Feature Reference
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the Transfer Return Extension for a specific extension:
1. Press
10 or 11.
2. Dial the number of the originating extension.
3. Dial the number of the extension to which the call should return if it is not
answered.
4. To program another extension, press
extension number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
5-272
e
and on system phones.)
f 0 0 s s # 3 0 6
n p
or until the
at extension