Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 305

Music-on-Hold (#602)
Valid Entries
1 = Active
2 = Not Active
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the setting of the Music-on-Hold jack:
1. Press
10 or 11.
2. To activate or deactivate the Music-on-Hold jack, press
appropriate value displays.
3. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 6 0 2
at extension
D
until the
5-195