Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 132

Feature Reference
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the Automatic Extension Privacy setting for an extension:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 16, press
3. To assign or unassign Automatic Extension Privacy, press
appropriate value displays.
4. To program another extension, press
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-22
e
and on system phones.)
f 0 0 s s # 3 0 4
1 6
.
D
n p
or until the
at extension
until the