Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 249

Forced Account Code Entry (#307)
Considerations
If SMDR is used, the account code assigned to incoming or outgoing calls
prints on call reports. (See ''Call Reporting Devices (SMDR)'' on page 4-9 for
more information about call reporting.) For forced account code entry, if a
Forced Account Code List exists, only valid account codes are printed on
the call report.
Forced account codes are not required to answer incoming calls at the
extensions programmed with this feature.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To program an extension for Forced Account Code Entry:
1. Press
10 or 11 .
2. At the Extension: prompt, enter the number of the extension to be
programmed. For example, to program extension 15, press
3. To assign or unassign Forced Account Code Entry, press
appropriate value displays.
4. To program another extension, press
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 3 0 7
1 5
D
n p
or until the
at extension
.
until the
5-139