Music-On-Hold Volume (#614) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Feature Reference

Music-on-Hold Volume (#614)

Description
This System Programming procedure allows you to select one of seven volume
settings for the external music source provided through the Music-on-Hold jack on
the PARTNER ACS processor module. This setting is system-wide.
Related Features
Music-on-Hold (#602) activates or deactivates the Music-on-Hold jack on the
processor module.
Considerations
Changes to the Music-on-Hold Volume setting will have immediate effect on all
calls currently receiving Music-on-Hold treatment.
Valid Entries
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the Music-on-Hold Volume setting:
1. Press
10 or 11.
The display shows the current setting.
2. To change the setting, press the number of the setting on the dialpad, or
press
3. If you want to return the volume to the default setting, press
5-196
1
2
3
4
5
6
7
e
and on system phones.)
f 0 0 s s # 6 1 4
D d
or until the correct setting is displayed.
+ (lowest volume)
+
+
+
+
+
+ (highest volume)
at extension
r
.