Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 326

Feature Reference
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To restrict an extension from making or receiving calls on all the lines in a specific
pool:
1. Press
2. Enter the number of the extension to be programmed. For example, to
program extension 23, press
appears:
Pool Access Rstr 23
Pool:
3. Enter the pool number (880, 881, 882, or 883) to be restricted at this
extension. For example, to restrict pool 881, press
restriction displays.
4. To change the pool restriction for this extension, press
appropriate value displays—see "Valid Entries" on the previous page.
5. At this point:
To restrict another pool at this extension, press
the pool number shows on the display. Then repeat Step 4.
To restrict another extension, press
at Step 2.
6. Select another procedure or exit programming mode.
5-216
e
and on system phones.)
f 0 0 s s # 3 1 5
2 3
. A display similar to the following
8 8 1
D
n p
or
N P
or
.
. The current
until the
until
and begin