Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 295

Making Calls
To make an outside call on a specific line:
1. Press the idle line button (red and green lights are both off) or dial
i8
2. If desired, lift the handset.
3. Dial the phone number.
To make an outside call using a specific pool:
1. Press the idle pool button (red and green lights are both off) or dial
plus the three-digit pool access code (880, 881, 882, or 883).
2. If desired, lift the handset.
3. Dial the phone number.
To reserve a busy line or pool so your phone beeps when the line or pool
becomes free—this is useful when you share a line, such as a WATS line, with
other people:
1. Press the busy line or pool button (red light is on steady) without lifting the
handset or pressing
2. When the line is free and your phone beeps, lift the handset and dial the
number. (If more than one person reserves a line, all their phones beep
when the line is free. The first person to pick up the phone after the beep
gets the line, and the other reservations are canceled.)
Standard Phone
1. Lift the handset.
You hear intercom dial tone .
9
2. Dial
You hear outside line dial tone.
3. Dial the phone number. (If you are using a PBX or Centrex line, you also
may need to use a dial-out code (usually 9) before you dial a number
outside the PBX or Centrex system.)
To make an outside call on a specific line:
1. Lift the handset.
You hear intercom dial tone.
8
2. Dial
3. Dial the phone number.
To make an outside call using a specific pool:
1. Lift the handset.
You hear intercom dial tone.
2. Dial the three-digit pool access code (880, 881, 882, or 883).
3. Dial the phone number.
plus the two-digit line number.
S
.
to get an outside line.
plus the two-digit line number.
i
5-185