Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 179

Caller ID Log Answered Calls (#317)—Release 2.0 or
Later
To view the Caller ID Call Log, a Caller ID Call Logging and Dialing
button must be programmed on a button with lights on a system display
phone. (This feature will not work if it is programmed on a button without
lights.)
Valid Entries
1 = Active (answered calls logged)
2 = Not active (answered calls are not logged)
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To program the extension to log answered calls:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 12, press
3. To set Caller ID Log Answered Calls, press
value displays. (See "Valid Entries.")
4. To set Call ID Log Answered Calls for another extension, press
p
Step 3.
5. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 3 1 7
1 2
until the extension number shows on the display. Then repeat
.
D
until the appropriate
at extension
n
or
5-69