Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 164

Feature Reference
To remove Call Forwarding manually:
1. Press
2. Dial your extension number twice.
To forward calls using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed
on the button, Call Forwarding is activated (on a button with lights, the
green light is on). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination extension was programmed, dial the extension number at
which you want the calls to ring.
Call Forwarding is activated (on a button with lights, the green light is on) .
To remove Call Forwarding using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed
on the button, Call Forwarding is deactivated (on a button with lights, the
green light is off). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination extension was programmed, dial your extension number
again.
Call Forwarding is deactivated (on a button with lights, the green light is
off) .
Standard Phone
To forward your calls:
1. Lift the handset.
You hear intercom dial tone.
2. Press
3. Dial your extension number.
4. Dial the number of the extension at which you want your calls to ring.
To remove Call Forwarding:
1. Lift the handset.
You hear intercom dial tone.
2. Press
3. Dial your extension number twice.
5-54
f 1 1
.
# 1 1
.
# 1 1
.