Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 257

Group Calling—Ring/Page (I7G/I*7G)
— If you page the group, start talking after the beep.
To transfer a call to the Calling Group, while on a call, press the button
programmed for ringing a Calling Group. You can hang up or stay on the
line to announce the call.
All available extensions in the Calling Group ring.
To manually ring or page a Calling Group:
1. Lift the handset and press
You hear intercom dial tone.
2. To make a ringing call, dial
All available extensions in the Calling Group ring.
To make a paging call, press
beep, start talking.
Your voice is heard through the speakers of all system phones that are not
busy in the Calling Group. If someone answers the page, you are
connected to that person and the rest of the Calling Group no longer hears
the page.
To manually transfer a call to a Calling Group:
1. While on a call, press
7
2. Dial
announce the call.
All available extensions in the Calling Group ring.
Standard Phone
To ring or page a Calling Group:
1. Lift the handset.
You hear intercom dial tone.
2. To make a ringing call, dial
All available extensions in the Calling Group ring.
To make a paging call, press
beep, start talking.
Your voice is heard through the speakers of all system phones that are not
busy in the Calling Group. If someone answers the page, you are
connected to that person and the rest of the Calling Group no longer hears
the page.
Your voice is heard through the speakers of all system phones that
are idle or have Do Not Disturb turned off in the Calling Group. If
someone answers the page, you are connected to that person and
the rest of the Calling Group no longer hears the page.
i
7
* 7
&
.
and a group number (1–4). You can hang up or stay on the line to
7
* 7
.
and a group number (1–4).
and a group number (1–4). After the
and a group number (1–4).
and a group number (1–4). After the
5-147