Press F 0 0 S; At Extension - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Copy Settings (#399)
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To copy the programmed settings from one extension to another of the same type:
1. Press
10 or 11.
2. At the Extension: prompt, enter the source extension to copy from. For
example, to copy the current settings from extension 18, press
3. At the Data- - - - - - - - - - - - prompt, enter the target
extension to copy to—any extension except the source extension is valid.
For example, to copy to extension 22, press
4. At this point:
5. Select another procedure or exit programming mode.
e
and on system phones.)
f 0 0 s s # 3 9 9
To copy the same settings to another extension, enter the new
extension number.
To copy another extension's settings, press
the extension number shows on the display. Repeat Step 3.

at extension

1 8
2 2
.
n p
or
.
until
5-97