Centralized Telephone Programming; Introduction - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
5

Centralized Telephone Programming

Introduction

Centralized Telephone Programming
0
This chapter describes centralized telephone programming for the System
Manager and includes the following information:
Accessing centralized telephone programming
Programming the features available with this function
Programming a single telephone
Copying programmed features from one extension to another extension
(Release 2.0 and higher)
See the Feature Reference for the appropriate user or operator guide for details
about each feature.
NOTE:
Only the System Manager should perform the programming procedures
described in this chapter.
Introduction
Centralized telephone programming allows the System Manager to program any
feature that can be programmed by individual telephone users, or by the system
operator, onto another telephone in the system. Any feature that can be
programmed at an individual telephone can be programmed using centralized
telephone programming.
The following features can be programmed only by using centralized
programming:
Barge-In
Headset Hang Up
Intercom buttons: all types (Key and Behind Switch mode only)
System Access buttons: all types (Hybrid/PBX only)
5
Issue 1
June 1997
Page 5-1
5