Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 34

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
1 Programming Basics
Programming Procedures
Using Enter
Pressing
The next screen in the procedure appears. See Steps 4 and 5 in the
sample procedure below.
The screen does not change and you can enter another extension or
line/trunk. In most of these cases,
either to assign the extension to a group or to assign a feature to the
extension.
remove the feature from the extension. See Steps 5 and 6 in the sample
procedure below for an example of this type of screen.
The procedure is complete and you return to a previous screen.
Console/Display Instructions
Specify the extension.

BIS/HFAI Extensions:
Enter extensions
xxxx
Backspace
Exit
Assign or remove BIS/HFAI capability.

Select
Enter
Delete
Return to the System Programming menu.

Select twice.
Exit
to save your entry has one of the following results:
Enter
is used to remove the extension from a group or to
Delete
Delete
Enter
or
.
1
is also an option.
Delete
Additional Information
SP: "Entering an Extension"
You may continue to assign or
remove BIS/HFAI capability to additional
extensions by repeating Steps 3 and 4.
Issue 1
June 1997
Page 1-20
is used
Enter
PC
Ã